Flange for Galvanized Iron Manufacturer,Supplier and Exporter in India
Product Code : EL-WS-10473
Written by Palak Mall, Senior Content Writer · reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory supply · updated 17 October 2026
The Flange for Galvanized Iron is a round flange with an internal female thread for 2 inch nominal galvanized iron water pipe, supplied with no bolt holes drilled. It is malleable cast iron, hot dip galvanized and threaded after galvanizing, rated for 14 bar (200 lb per square inch), and Water and Sanitation lists it with the threaded GI fittings.
What is specified
| Detail | Figure listed |
|---|---|
| Type | Round flange, female |
| Thread | Internal female |
| Material | Malleable cast iron |
| Finish | Hot dip galvanized, threaded after galvanizing |
| Nominal diameter | 2 inch |
| Pressure | 14 bar (200 lb per square inch) |
| Bolt holes | None, not drilled |
Supplied undrilled
The flange face is a blank with no bolt holes, so it can be drilled to the bolt pattern of the valve, pump or flange it will be joined to. A 2 inch connection also appears on the Tee Reduction, for Water Pipes, as its side branch.
Questions buyers ask
Does it come drilled?
No. It is a round flange with no holes drilled.
Why threaded after galvanizing?
Cutting the thread after the zinc coating is applied keeps the thread clean and to size, rather than partly filled with zinc.
Request a quotation
Send the quantity, and the bolt pattern it must match if known, through the contact page.
.jpg)
